.5" x 3.5" T316 Stainless Sheared Bar

$57.65$299.57

Clear

Specifications

Mechanical Properties

Ultimate Tensile Strength 90,000-125,000
Yield Strength 45,000
Brinell Hardness 45
Elongation 35
Machinability and Weldability
Machinability is rated at 36% of B1112. Average cutting speed 60 ft/min. Easily welded by all commercial processes except forge or hammer welding. Annealing is recommended after forging to maintain maximum corrosion resistance. 316/316L can be forged between 2100°-2300° F. Do not forge below 1700° F.
Tolerances
ROUND (drawn, smooth turned, or ground)
size (inches) OVER UNDER
.044 to 5/16, incl 0.001 0.001
5/16 to 1/2, excl 0.0015 0.0015
1/2 to 1, excl 0.002 0.002
1 to 1-1/2, excl 0.0025 0.0025
1-1/2 to 4, incl 0.003 0.003
4-1/8 to 4-1/2, incl 0.005 0.005
4-9/16 to 6, incl 0.008 0.008

ROUND (Hot Roll)
size (inches) OVER UNDER Out of RD
over 2 to 2-1/2, incl 0.031 0 0.023
over 2-1/2 to 3-1/2, incl 0.047 0 0.035
over 3-1/2 to 4-1/2, incl 0.063 0 0.046
over 4-1/2 to 5-1/2, incl 0.079 0 0.058
over 5-1/3 to 6-1/2. incl 0.125 0 0.070
over 6-1/2 to 8 incl 0.156 0 0.085

SQUARE AND HEXAGON (cf)
size (inches) OVER UNDER
1/8 to 5/16, excl 0 0.002
5/16 to 1/2, excl 0 0.003
1/2 to 1, incl 0 0.004
over 1 to 2, incl 0 0.006
over 2 to 3, incl 0 0.008
over 3 to 4, incl 0 0.010

FLAT (cf)
Width Tolerances (+/-) inches
1/4 thk & under over 1/4 thk
width (in) 0.005 0.005
3/8 to 1 incl 0.004 0.004
over 1 to 2 incl 0.006 0.004
over 2 to 3 incl 0.008 0.004
over 3 to 4-1/2 inc 0.01 0.005


width (in) Thickness tolerance (+/-) in
over .035 to 1 incl 0.002
over 1 to 2 incl 0.003
over 2 to 3 incl 0.003
over 3 to 4-1/2 incl 0.005

Flat (HR)

Technical Specifications

ASTM A276, ASTM A479, AMS 5648

Chemistry

C.03-.08
Mn2
Si1
Cr16-18
Ni.1
Cu.75
Mo2-3
P.04
S.03
Scroll to Top